ABS Plus Blue is a low-warp, odor-reducing 3D printing material that gives you most of the strength and impact-resistance of regular ABS without the hassle. With ABS Plus, printed parts will end up being more dimensionally accurate, more aesthetically impressive, and tougher thanks to the improved layer bonding. You can print the filament at 245 degrees making it still accessible with most 3D printers. The filament adheres well to glass and other common buildplate adhesives at about 80 degrees.. This is the 1.75 mm diameter version on 1000 gg spool. ABS Plus filament Blue 1.75 mm 1000 g is a superior quality filament produced in The Netherlands. Real filaments guarantees high-quality, diameter-accurate filament, resulting in the best 3D printing experience.

ABS Pro filament White 2.85 mm 1000 g is a superior quality filament produced in The Netherlands. Real filaments guarantees high-quality, diameter-accurate filament, resulting in the best 3D printing experience. ABS Pro is the amazing successor to the industry's gradually improving ABS filament quality and ease-of-use. This material retains the fantastic appearance associated with ABS, yet raises print reliability to the level of PLA by eliminating layer delamination and warping. Furthermore, the mechanical properties exceed those of standard ABS, including toughness, weatherproofing and impact tolerance. ABS Pro is universally compatible with all heater-bed enabled FDM printers and is the obvious replacement for your old spools when you're ready to reclaim your schedule and sanity. Specifications

ABS Pro filament White 1.75 mm 1000 g is a superior quality filament produced in The Netherlands. Real filaments guarantees high-quality, diameter-accurate filament, resulting in the best 3D printing experience. ABS Pro is the amazing successor to the industry's gradually improving ABS filament quality and ease-of-use. This material retains the fantastic appearance associated with ABS, yet raises print reliability to the level of PLA by eliminating layer delamination and warping. Furthermore, the mechanical properties exceed those of standard ABS, including toughness, weatherproofing and impact tolerance. ABS Pro is universally compatible with all heater-bed enabled FDM printers and is the obvious replacement for your old spools when you're ready to reclaim your schedule and sanity.

With Real Filament PLA tough you can create objects with more strength using a common FDM 3D printer. This advanced material is optimized for 3D printing, so while advanced, it doesn't take extra skills to use in your 3D printer. The material is produced in The Netherlands and checked for consistency during the entire manufacturing process, giving you you the best possible printing experience. Compared to normal PLA the material is stronger after printing with great layer adhesion, while maintaining the stiffness and printability. This is PLA tough Red 1.75 mm on 1 kg spool in 1.75 mm diameter. We recommend a printing temperature of 210 degrees for most applications, but with faster or slower printing the temperature should be slightly adjusted accordingly. The materials adheres best on an 55 degrees heated bed using 3dlac.

PLA filament Fluorescent Pink 2.85 mm 1000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the PLA is high-quality and diameter consistent filament, giving you the best 3D printing experience. PLA is great for beginners to 3D printing, but also novices will find it great to use, as it is easy to work with while still give stunning results. PLA filament is available in multiple colors, but also different types are available within the Real brand. PLA (polylactic acid) filament is amongst the oldest and still the most heavily used mediums in the 3D printing community, mainly due to its benefits as a versatile and environmentally friendly thermoplastic. Both organic and biodegradable, PLA is easily compounded with other ingredients to influence its final properties, for example flexibility and metallically. The uncolored form of Real PLA is a translucent off-white color and has a printing temperature between 195 - 205 degrees (depending on hot end characteristics). Darker colors of Real may require a few extra degrees of temperature due to the coloring process. The filament should extrude smoothly and appear slightly shiny. PLA is denser and tougher than ABS, but is more brittle and susceptible to cracking under high loads. It is also less resistant to the outdoor elements (UV light and water) than other common thermoplastics (see Nylon, ABS and PETG). PLA can print well on an unheated surface using Blue Painters or Kapton tape, and most 3D print stickers. For ease and convenience, we recommend using spray such as 3DLAC on a glass bed. A low bed temperature between 50 - 60 degrees further reduces the chance of warping and makes final print removal easier once the print surface has cooled. Also check out the Real Satin and flex lines of PLA filament for even more options!

With Real Filament PLA tough you can create objects with more strength using a common FDM 3D printer. This advanced material is optimized for 3D printing, so while advanced, it doesn't take extra skills to use in your 3D printer. The material is produced in The Netherlands and checked for consistency during the entire manufacturing process, giving you you the best possible printing experience. Compared to normal PLA the material is stronger after printing with great layer adhesion, while maintaining the stiffness and printability. This is PLA tough White 1.75 mm on 1 kg spool in 1.75 mm diameter. We recommend a printing temperature of 210 degrees for most applications, but with faster or slower printing the temperature should be slightly adjusted accordingly. The materials adheres best on an 55 degrees heated bed using 3dlac.

With Real Filament PLA tough you can create objects with more strength using a common FDM 3D printer. This advanced material is optimized for 3D printing, so while advanced, it doesn't take extra skills to use in your 3D printer. The material is produced in The Netherlands and checked for consistency during the entire manufacturing process, giving you you the best possible printing experience. Compared to normal PLA the material is stronger after printing with great layer adhesion, while maintaining the stiffness and printability. This is PLA tough Black 2.85 mm on 1 kg spool in 2.85 mm diameter. We recommend a printing temperature of 210 degrees for most applications, but with faster or slower printing the temperature should be slightly adjusted accordingly. The materials adheres best on an 55 degrees heated bed using 3dlac.

With Real Filament PLA tough you can create objects with more strength using a common FDM 3D printer. This advanced material is optimized for 3D printing, so while advanced, it doesn't take extra skills to use in your 3D printer. The material is produced in The Netherlands and checked for consistency during the entire manufacturing process, giving you you the best possible printing experience. Compared to normal PLA the material is stronger after printing with great layer adhesion, while maintaining the stiffness and printability. This is PLA tough Neutral 2.85 mm on 1 kg spool in 2.85 mm diameter. We recommend a printing temperature of 210 degrees for most applications, but with faster or slower printing the temperature should be slightly adjusted accordingly. The materials adheres best on an 55 degrees heated bed using 3dlac.

REAL PC PETG 3D Printer Filament - Black - Spool of 0.5Kg - 1.75mm (REFPCPETGBLACK500MM175)

Want a material that has a high mechanical strength, but does not warp like ABS? PLA Pro is a 3D filament for 3D users that want high-speed printing with better results. This compound is optimized of 3D printing like PLA, but with properties more like ABS, like temperature resistance and mechanical strength. PLA Pro is produced in The Netherlands and guaranteed high-quality, diameter consistent filament, giving you the best 3D printing experience. This is PLA Pro Blue 2.85 mm 1000 g on 1 kg environmentally friendly, recycle spool. The material gives a matt finish, reducing the visibility of layers and giving it a more ABS-like look. We recommend printing this materials at about 225 degrees with 3Dlac on a 60 degrees heated bed. For 3D printing with a higher volume material flow, you can increase the temperature a bit.

Want a material that has a high mechanical strength, but does not warp like ABS? PLA Pro is a 3D filament for 3D users that want high-speed printing with better results. This compound is optimized of 3D printing like PLA, but with properties more like ABS, like temperature resistance and mechanical strength. PLA Pro is produced in The Netherlands and guaranteed high-quality, diameter consistent filament, giving you the best 3D printing experience. This is PLA Pro Neutral 2.85 mm 1000 g on 1 kg environmentally friendly, recycle spool. The material gives a matt finish, reducing the visibility of layers and giving it a more ABS-like look. We recommend printing this materials at about 225 degrees with 3Dlac on a 60 degrees heated bed. For 3D printing with a higher volume material flow, you can increase the temperature a bit.

Want a material that has a high mechanical strength, but does not warp like ABS? PLA Pro is a 3D filament for 3D users that want high-speed printing with better results. This compound is optimized of 3D printing like PLA, but with properties more like ABS, like temperature resistance and mechanical strength. PLA Pro is produced in The Netherlands and guaranteed high-quality, diameter consistent filament, giving you the best 3D printing experience. This is PLA Pro Red 2.85 mm 1000 g on 1 kg environmentally friendly, recycle spool. The material gives a matt finish, reducing the visibility of layers and giving it a more ABS-like look. We recommend printing this materials at about 225 degrees with 3Dlac on a 60 degrees heated bed. For 3D printing with a higher volume material flow, you can increase the temperature a bit.

With Real Filament PLA tough you can create objects with more strength using a common FDM 3D printer. This advanced material is optimized for 3D printing, so while advanced, it doesn't take extra skills to use in your 3D printer. The material is produced in The Netherlands and checked for consistency during the entire manufacturing process, giving you you the best possible printing experience. Compared to normal PLA the material is stronger after printing with great layer adhesion, while maintaining the stiffness and printability. This is PLA tough Gray 2.85 mm on 1 kg spool in 2.85 mm diameter. We recommend a printing temperature of 210 degrees for most applications, but with faster or slower printing the temperature should be slightly adjusted accordingly. The materials adheres best on an 55 degrees heated bed using 3dlac.

PLA filament Light Blue 2.85 mm 1000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the PLA is high-quality and diameter consistent filament, giving you the best 3D printing experience. PLA is great for beginners to 3D printing, but also novices will find it great to use, as it is easy to work with while still give stunning results. PLA filament is available in multiple colors, but also different types are available within the Real brand. PLA (polylactic acid) filament is amongst the oldest and still the most heavily used mediums in the 3D printing community, mainly due to its benefits as a versatile and environmentally friendly thermoplastic. Both organic and biodegradable, PLA is easily compounded with other ingredients to influence its final properties, for example flexibility and metallically. The uncolored form of Real PLA is a translucent off-white color and has a printing temperature between 195 - 205 degrees (depending on hot end characteristics). Darker colors of Real may require a few extra degrees of temperature due to the coloring process. The filament should extrude smoothly and appear slightly shiny. PLA is denser and tougher than ABS, but is more brittle and susceptible to cracking under high loads. It is also less resistant to the outdoor elements (UV light and water) than other common thermoplastics (see Nylon, ABS and PETG). PLA can print well on an unheated surface using Blue Painters or Kapton tape, and most 3D print stickers. For ease and convenience, we recommend using spray such as 3DLAC on a glass bed. A low bed temperature between 50 - 60 degrees further reduces the chance of warping and makes final print removal easier once the print surface has cooled. Also check out the Real Satin and flex lines of PLA filament for even more options!

REAL RealFlex 3D Printer Filament - White - spool of 1Kg - 1.75mm

With Real Filament PLA tough you can create objects with more strength using a common FDM 3D printer. This advanced material is optimized for 3D printing, so while advanced, it doesn't take extra skills to use in your 3D printer. The material is produced in The Netherlands and checked for consistency during the entire manufacturing process, giving you you the best possible printing experience. Compared to normal PLA the material is stronger after printing with great layer adhesion, while maintaining the stiffness and printability. This is PLA tough Black 1.75 mm on 1 kg spool in 1.75 mm diameter. We recommend a printing temperature of 210 degrees for most applications, but with faster or slower printing the temperature should be slightly adjusted accordingly. The materials adheres best on an 55 degrees heated bed using 3dlac.

Want a material that has a high mechanical strength, but does not warp like ABS? PLA Pro is a 3D filament for 3D users that want high-speed printing with better results. This compound is optimized of 3D printing like PLA, but with properties more like ABS, like temperature resistance and mechanical strength. PLA Pro is produced in The Netherlands and guaranteed high-quality, diameter consistent filament, giving you the best 3D printing experience. This is PLA Pro Blue 1.75 mm 1000 g on 1 kg environmentally friendly, recycle spool. The material gives a matt finish, reducing the visibility of layers and giving it a more ABS-like look. We recommend printing this materials at about 225 degrees with 3Dlac on a 60 degrees heated bed. For 3D printing with a higher volume material flow, you can increase the temperature a bit.

Want a material that has a high mechanical strength, but does not warp like ABS? PLA Pro is a 3D filament for 3D users that want high-speed printing with better results. This compound is optimized of 3D printing like PLA, but with properties more like ABS, like temperature resistance and mechanical strength. PLA Pro is produced in The Netherlands and guaranteed high-quality, diameter consistent filament, giving you the best 3D printing experience. This is PLA Pro Black 1.75 mm 1000 g on 1 kg environmentally friendly, recycle spool. The material gives a matt finish, reducing the visibility of layers and giving it a more ABS-like look. We recommend printing this materials at about 225 degrees with 3Dlac on a 60 degrees heated bed. For 3D printing with a higher volume material flow, you can increase the temperature a bit.

Want a material that has a high mechanical strength, but does not warp like ABS? PLA Pro is a 3D filament for 3D users that want high-speed printing with better results. This compound is optimized of 3D printing like PLA, but with properties more like ABS, like temperature resistance and mechanical strength. PLA Pro is produced in The Netherlands and guaranteed high-quality, diameter consistent filament, giving you the best 3D printing experience. This is PLA Pro Neutral 1.75 mm 1000 g on 1 kg environmentally friendly, recycle spool. The material gives a matt finish, reducing the visibility of layers and giving it a more ABS-like look. We recommend printing this materials at about 225 degrees with 3Dlac on a 60 degrees heated bed. For 3D printing with a higher volume material flow, you can increase the temperature a bit.

REAL PC ABS 3D Printer Filament -White- spool of 1Kg - 1.75mm (REFPCABSWHITE1000MM175)

PLA filament Black 1.75 mm 3000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the PLA is high-quality and diameter consistent filament, giving you the best 3D printing experience. PLA is great for beginners to 3D printing, but also novices will find it great to use, as it is easy to work with while still give stunning results. PLA filament is available in multiple colors, but also different types are available within the Real brand. PLA (polylactic acid) filament is amongst the oldest and still the most heavily used mediums in the 3D printing community, mainly due to its benefits as a versatile and environmentally friendly thermoplastic. Both organic and biodegradable, PLA is easily compounded with other ingredients to influence its final properties, for example flexibility and metallically. The uncolored form of Real PLA is a translucent off-white color and has a printing temperature between 195 - 205 degrees (depending on hot end characteristics). Darker colors of Real may require a few extra degrees of temperature due to the coloring process. The filament should extrude smoothly and appear slightly shiny. PLA is denser and tougher than ABS, but is more brittle and susceptible to cracking under high loads. It is also less resistant to the outdoor elements (UV light and water) than other common thermoplastics (see Nylon, ABS and PETG). PLA can print well on an unheated surface using Blue Painters or Kapton tape, and most 3D print stickers. For ease and convenience, we recommend using spray such as 3DLAC on a glass bed. A low bed temperature between 50 - 60 degrees further reduces the chance of warping and makes final print removal easier once the print surface has cooled. Also check out the Real Satin and flex lines of PLA filament for even more options!