REAL PLA 3D Printer Filament - Satin Sun - spool of 0.5Kg – 2.85mm (REFPLASATINSUN500MM285)

Τα μελάνια MediaRange αναπαράγουν τις φωτογραφίες και τα έγγραφά σας σε φωτεινά πλούσια χρώματα, προσφέροντας εξαιρετική κάλυψη και ποιότητα εκτύπωσης. Τα δοχεία μελανιού είναι κατασκευασμένα ειδικά για κάθε μοντέλο εκτυπωτή που διευκολύνει την αντικατάστασή τους. Συμβατά μοντέλα: Canon® Pixma iP4800, iP4900, iP4950, iX6550, MG5100, MG5140, MG5150, MG5200, MG5250, MG5350, MG6150, MG6250, MG8150, MG8250, MX715, MX880, MX885, MX895

Υφασμάτινες σακούλες με μικροϊνες 10τμχ.

This Philips LED classic ball bulb is the perfect replacement for the classic old-fashioned incandescent bulb. The shape and dimensions match up perfectly. The bulb fits on a fixture with an E27 fitting and has a power of 4.3W. The bulb is made of frosted glass. The warm white light emitted by the bulb has a color temperature of 2700K and a luminous flux of 470 lumen. These values ​​ensure that the bulb has an EyeComfort quality mark, which means that the light is more pleasant and less intense on the eyes. The bulb lasts for about 15 years with normal use of 2.7 hours a day. That equates to approximately 15,000 burning hours and 20,000 shackel cycles.

PLA filament Satin Splash 2.85 mm 500 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the PLA is high-quality and diameter consistent filament, giving you the best 3D printing experience. PLA is great for beginners to 3D printing, but also novices will find it great to use, as it is easy to work with while still give stunning results. PLA filament is available in multiple colors, but also different types are available within the Real brand. PLA (polylactic acid) filament is amongst the oldest and still the most heavily used mediums in the 3D printing community, mainly due to its benefits as a versatile and environmentally friendly thermoplastic. Both organic and biodegradable, PLA is easily compounded with other ingredients to influence its final properties, for example flexibility and metallically. The uncolored form of Real PLA is a translucent off-white color and has a printing temperature between 195 - 205 degrees (depending on hot end characteristics). Darker colors of Real may require a few extra degrees of temperature due to the coloring process. The filament should extrude smoothly and appear slightly shiny. PLA is denser and tougher than ABS, but is more brittle and susceptible to cracking under high loads. It is also less resistant to the outdoor elements (UV light and water) than other common thermoplastics (see Nylon, ABS and PETG). PLA can print well on an unheated surface using Blue Painters or Kapton tape, and most 3D print stickers. For ease and convenience, we recommend using spray such as 3DLAC on a glass bed. A low bed temperature between 50 - 60 degrees further reduces the chance of warping and makes final print removal easier once the print surface has cooled. Also check out the Real Satin and flex lines of PLA filament for even more options!

This Philips LED bulb consumes about 85% less energy than traditional bulbs. And with 15,000 burning hours, the bulb has an exceptionally long life. Simply replace your traditional light bulb and experience the benefits of modern LED lighting. As soon as you switch it on, it immediately burns at full brightness and the light is comfortable for the eyes. The pear-shaped LED bulb has a large fitting (E27) and is finished with a matt coating. The light output of 1055 lumens makes the light source ideal for general lighting in any living space. The colour temperature of 2700K provides atmospheric warm white light.