Remington Keratin Therapy Pro S8593 Hair Straightener with Ceramic Plates (S8593) (REMS8593)

Ρολό Ετικέτα Θερμική 105x148mm 200 ετικέτες

MediaRange USB 3.1 Combo Flash Drive with USB Type-C™ plug, 64GB (MR937)

Η θερμοαγώγιμη πάστα Natec Husky προσφέρει άριστη μεταφορά θερμότητας μεταξύ επεξεργαστή και ψύκτρας, χάρη στη θερμική αγωγιμότητα 4.63 W/mK. Έρχεται σε βολική σύριγγα 4g για εύκολη και ακριβή εφαρμογή, χωρίς ανάγκη προθέρμανσης πριν τη χρήση. Δεν είναι ηλεκτρικά αγώγιμη και προσφέρει σταθερή απόδοση σε εύρος θερμοκρασιών από -30°C έως 280°C.

Ασύρματο πληκτρολόγιο της εταιρείας HP. Συνδέεται μέσω bluetooth με όσες συσκευές θέλεις να χειριστείς, έχοντας τη δυνατότητα εύκολης εναλλαγής μεταξύ τους. Τα επιπλέον πλήκτρα έντασης ήχου σου επιτρέπουν τον εύκολο έλεγχο του ήχου όταν βλέπεις μια ταινία.

PLA filament Black 2.85 mm 5000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the PLA is high-quality and diameter consistent filament, giving you the best 3D printing experience. PLA is great for beginners to 3D printing, but also novices will find it great to use, as it is easy to work with while still give stunning results. PLA filament is available in multiple colors, but also different types are available within the Real brand. PLA (polylactic acid) filament is amongst the oldest and still the most heavily used mediums in the 3D printing community, mainly due to its benefits as a versatile and environmentally friendly thermoplastic. Both organic and biodegradable, PLA is easily compounded with other ingredients to influence its final properties, for example flexibility and metallically. The uncolored form of Real PLA is a translucent off-white color and has a printing temperature between 195 - 205 degrees (depending on hot end characteristics). Darker colors of Real may require a few extra degrees of temperature due to the coloring process. The filament should extrude smoothly and appear slightly shiny. PLA is denser and tougher than ABS, but is more brittle and susceptible to cracking under high loads. It is also less resistant to the outdoor elements (UV light and water) than other common thermoplastics (see Nylon, ABS and PETG). PLA can print well on an unheated surface using Blue Painters or Kapton tape, and most 3D print stickers. For ease and convenience, we recommend using spray such as 3DLAC on a glass bed. A low bed temperature between 50 - 60 degrees further reduces the chance of warping and makes final print removal easier once the print surface has cooled. Also check out the Real Satin and flex lines of PLA filament for even more options!